Prefs.ini = OK.

Already try deleting it, but its not the configs... it's an optimization issue, because it start after 50 turns aprox (when there are lots of ships or starbases). When I press "next turn" it stutter a LOT and the FPS drops to 5 or 13. When its my turn the average is 25 FPS.

Other very demanding games work fine at max graph settings and 60 FPS (because of vsync)... I cant believe that the simplified map (far away) can't be showed at 60 FPS min. The only way to get 30-40 FPS is to zoom in at max, but I can't play like that, showing me only 1 or 2 ships.

Interesting. I've posted about a similar issue but wasn't really paying attention to my exact FPS. So I decided to check them. In the main Galaxy screen, fully zoomed out, I get 39-40 FPS and it can dip down to 31-34 FPS when I tell one of my ships to move.The ship's movement is very jerky, as if I were having low FPS, which I'm not. I think I should be getting a little higher FPS with my setup (Maximus VII Hero, i7 4790k @4.4GHz, EVGA GTX970SSC 355.82s, 32gb DDR3 2134, 1000W PS, Onboard sound, 32" Bravia XBR, Win7Pro64) but even with 30 FPS ship movement should be nice and smooth. Using different amounts of zooming gives me varying FPS, typically from 50-60 FPS. After hitting the Turn button, they would drop down to 30-32 FPS but the AI ship's movements are not as jerky as mine are! Very odd. I've also deleted my Prefs.ini and reset settings and it made no difference. Latest official nVidia drivers, along with my other hardware drivers are all up to date.

MottiKhan, Yes, I'm back on the Opt-in since the hot fix was released to it last night (1.31 was causing lots of stuck turns where 1.3 hadn't given me any yet) So I've re-opted in again last night and I was able to continue my 1.3 game that just got stuck. Long story short, I haven't had enough time with it yet to see. When I"m done with hwork I'll be play testing it some more and will update here if anything has improved. Thanks for the feedback/info!

Edit: Okay, I've had a little time to test and found that I still have it with 1.3.1.4. Start with "ideal" conditions. Fresh reboot, make sure no extra un-needed processes are running. Start the game and wait a couple of minutes after the save game is loaded to make sure all that needs/wants to be loaded is. I made a quick little video and posted it on my web site to show what I'm seeing. I find that it is less with 1.3.1.4 but it still happens and under slightly different situations. It was worst when first starting to play, almost like all the video that wants to pre-load hasn't been able to finish loading yet. The longer I played, and it was only for about 15 min. tops as I was still working and trying to grab some lunch, the less it happened. If you watch the short video. The first two ships show the stutter quite easily, the 3rd ship I move shows none at all, as if all the textures, etc. have finished loading into memory. Then I switched to a different part of the map that I haven't been to yet, this is after other ships in my initial area I started in began to all move smoothly, and the stutter was back just like when I first started the game, as if the new textures haven't loaded yet. All very odd.

http://www.acupuncture-tcm.com/Videos/ShipStutter.mp4

Edit#2: I forgot to mention that my FPS were steadily in the 50s during this time with my CPU usage about 35% and ram was having about 15gb out of my 32gb being used. The video card was also running just fine with nothing seemingly to be over stressed. I had plenty of head room to spare. While running FRAPS I also noticed that it having capped my FPS at 30fps for the video also seemed to help with the stutter issue unless it was just coincidental as I've not run and recorded video with FRAPS in this game before.

sended

Quoting redviper37,

reply 9

Can you give us a link to your save game?  Use Dropbox or Google drive to share the file

The CPU is always at 40% top.. but the FPS issue is in place when it's my turn, so it's a graphic problem.

My world: https://dl.dropboxusercontent.com/u/24797185/Ultimo.zip

I've added some extra info into my original post in this thread after doing a little more testing with 1.3.1.4 and added a video to show what I see.

Spent another 2+ hours playing tonight and I have to say it's really no different for me. I typically play with the main map zoomed out a couple of notches past the ship/planet rendering phase and usually have a steady 50fps. CPU usage tended to be between 20-25% with RAM being mostly around 15gb being used. The odd thing noticed this time around is it's only my ship movement during my turn that has this jerky ship movement. As redviper37 noted, my FPS also drop down to the teens or even single digits for a few sec. while the AI takes its' turn but the movement on screen remains smooth for me during the AI's turn.